The duo of Cubic Zirconia vs. Diamond may not stir up your attention just because they look the same. If you forgive the looks, you will notice one is a chemical makeup while the other one is the symbol of pride and love. Looking up to their physical properties, you will see that both of them are entirely different as CZ is just a stimulant of the diamond. To help you stay safe from Jeweler Hoaxes. Following, we are lighting the differences between a Diamond and Cubic Zirconia.
Cubic Zirconia vs. Diamond Jewelry
Choosing between Diamond and Cubic Zirconia widely depends on one factor, your budget. Considering between a real Diamond or hoax CZ Engagement Ring or another piece of jewelry only needs one caution, to make your jewelry look like real. Jewelry, despite its shape, size or even value, it’s always appreciated for its emotional and technical terms. Cubic Zirconia being an inexpensive alternative to diamond, it faces some challenges from its original counterpart.
Fortunately, a brand new CZ looks almost like a real diamond to the naked eye. This fact is the only reason buyers substitute it for the real thing. Diamonds as compared to CZ have only one con; they are expensive while the CZ have a brief list. Only the Brand new Cubic Zirconia can compete with the looks of a real diamond. The problem is, this new look is hard to maintain and eventually with thepassage of time; it wears off.
CZ can be molded into shapes that will break a diamond, but CZ won’t hold it for long. A perfect cut diamond can retain it forms with bright, sharp edges for decades where a CZ won’t last for even eight years. The Focus of a CZwears away, and it won’t hold up for long. Diamonds last forever, CZ are cheaper than a few cups of coffee. So, how do you want to show your love
Different in almost every aspect, Cubic Zirconia and Diamond have their respective formations. Their structuresare detailed below:
Diamonds are believed to be first mined in Golconda, India. The Deposits of this natural material was found in the rivers of Godavari. In the late Twentieth Century, Gemologists came up with different ways to grade gemstones on behalf of their characteristics. These featuresare known as the 4 Cs, Carat, Cut, Clarity and Color.
Cubic Zirconia is a synthetic crystal made by man. The Baddeleyitewas discovered in 1892, andIt was in natural form, Zirconium Oxide. Almost 40 years later, stabilized Zirconia was foundfailed after many attempts to stabilizeit. Afterward, German Mineralogists found the natural cubic zirconia in theform of microscopic grains such as Metamict Zircon.
Sharing similarities of a Diamond, the concept of Single Crystal Cubic Zirconia Gemstonebrought up before 1950’s, but it put to use in 1960’s. The First Single Crystal Growth of Cubic Zirconia took place in France. Soviets later perfected this method, and they introduced this synthetic crystal in Jewelry.
The Breakthrough of Hoax Diamonds was published in early 1970’s while the production started after 3-4 years. This concept enjoyed mainstream success and by 1980, almost 50 million karats (or 10,000 kg) Cubic Zirconia was produced.
Manufacturing of Cubic Zirconia vs. Formation of Diamond
Cubic Zirconia vs. Diamond is just likewhat is brass as compared to gold! CZ is manmade while the Diamondenjoys a natural formation, below we are going to take a look at the structure of diamond along with thehistory of CZ manufacturing.
Formation of a Diamond needs precise conditions. The carbon bearing materials exposed to high pressure, this pressure ranges from 45 to 60 kilobars. Also of High Pressure, Formation of Diamonds also need high temperature such as 900 t0 1300 C.Besides the preciseweight and temperate; Diamonds need natural deep craters to form. These holes are estimated to be as large as 150-200 km.
Not natural as it is only the synthesized form of Zirconium Oxide. Zirconia after its extraction from Baddeleyite, which awards its similarities to a real Diamond.The Zirconia crystal are made by heating and melting zirconium power with zirconium dioxide. Both of them with the heatof 4,982ºF are dissolved and merged.
How to Tell the Difference?
Understanding the difference between a Cubic Zirconia and a Diamond is nearly impossible. Only with extensive care and research, a real diamond can be differentiated from a Cubic Zirconia. Diamonds are the hardest naturally occurring surface. Therefore, these are not easy to scratch. If a diamond is real, it shouldn’t have any scratches on its surface.
Trying to scratch glass to determine whether a diamond is real or fake is not always effective. Thanks to advancements in Hoax Diamond Manufacturing, the artificial diamonds can also scratch glass. Diamonds don’t retain heat for much long. After you breathe on them, their surface instantly clears off where a CZ stays cloudy for a brief moment.
Another way to confirm whether a diamond is real or not is to place it on a newspaper. As Diamond Refracts a lot of lights, it will be nearly impossible to read even a single letter. Fortunately, this isn’t the case with Cubic Zirconia. If you place it in a newspaper, you will quickly read out letters through it.
|Introduction||A Crystalline Mineral used as a Cheaper Alternative to Diamond||Natural Mineral, better known as an Allotrope of Carbon|
|Color||Colorless (Colored on Demand)||Yellow or Brown Tinge, only the rarest are Colorless|
|Crystal Habit||Dipyramidal Prismatic||Isometric Octahedral|
|Crystal System||Tetragonal: 2-4M||Hexoctahedral|
|Used For||Gemstones, Cheaper Stimulant of Diamonds||Jewelry, Cutting, and Industrial Use|
|Hardness||8.5 Mohs||10 Mohs|
|Thermal Conductivity||Thermal Insulator||Thermal Conductors|
|Flaws||Absolutely Flawless||Always have some Minor Flaws|
|Melting Point||2750 C||3550 C|
Dont forget to read about moissanite vs diamond